Coalescer cartridges are offered in a variety of cartridge configurations to replace current industry cartridges. They are available with double open ends and flat gaskets, open ends with O-Ring seals, and thread base construction. Cartridges are available in a number of different diameters and lengths. All coalescers are single piece construction, resulting in increased strength and reducing the chance of bypass. We use a combination of one or more layers of pleated media and various layers of fiberglass. The pleated media removes the bulk of solids. Coalescing performance is determined by the type and number of layers of fiberglass.
Our hydraulic filter elements are ideal replacements for many OEM elements and are designed to be functionally and dimensionally interchangeable.
|Available in four different series of efficiency. These ratings are nominal and should be used for reference only:|
|Series||Rated at||Normally used for||Removes water down to|
|25 series||25 micron||fuels such as diesel or heating oils.||25 ppm|
|5 series||5 micron||place of the 25 series when more efficiency is or tighter filtration is desired.||10 ppm|
|2 series||2 micron||lighter hydrocarbons such as kerosene, gasoline, or naphtha.||less than 5 ppm|
|1 series||1/2 to 1 micron||is designed for maximum coalescing and particulate removal efficiency||less than 5 ppm|